50cc scooter carb- when u pull the throttle there is a metal flap that descends onto a pin? - float bowl metal phbh phbl dellorto
Metal pin, when he gets into a gas or offer, or simply do not manually into the carburetor. If I had, and the separation of carbohydrates in the lower half of it in his hand (Cup Float), the pin would be outside outside of the cup. When I push the pin (downward - the part of the metal cap when he presses the accelerator pedal), the gas will squirt like a water cannon. In any case, my questions: what are referred to these pins. Now the main thing I want to know now is ... (if I use the word )....--- what would be the ideal situation when the valve is bent upwards or downwards. Since I almost want to say, if the flap down and when I told him the gas, the valve is pressed down and get the PIN at a point before the hook on the throttle. And if I lean on the side wings up - the flap, the pin go to a point later in the battle. Also, as in their mutual relations. I do not know if I can ask a question. Thank you for reading. I hope u can help.
Wednesday, December 2, 2009
Float Bowl Metal Phbh Phbl Dellorto 50cc Scooter Carb- When U Pull The Throttle There Is A Metal Flap That Descends Onto A Pin?
1 comment:
It is the butterfly. Do not bend all that does not help performance. When you press the throttle is opened to allow more air into the engine, so if you are twice as high, as always pressed the gas pedal. The reason for the deduction on the accelerator, is that the normal flow of gas from a carburetor, not enough for you to increase rpm quickly.
Post a Comment